Xiaomi

Xiaomi 12V Max Brushless Cordless Drill

SKU: 592180

Cordless powerful cordless drill for stable and reliable performance.

Original price was: €129.90.Current price is: €119.00.

Out of stock

add to wishlist

added to wishlist

Brand: Xiaomi

Category: Gadget

Product Description

Not suitable for use on cement
The maximum torque error is ±5 Nm due to the measuring device used. Torque test method: With the battery fully charged, the mode selection button is pressed to enter the screwdriving mode. When the screwdriver is fully charged, the screwdriver shall be pressed until the screwdriver is fully charged and the screwdriver is fully loaded, Continue a torque tester shall be used to test the torque of the locked rotor at level 30. * The no-load speed tolerance is approximately 10%. Speed test method: The fully charged device is operated for 2 minutes without load and the speed without load is checked in Continue a speed tester.
Screw test method: with the device fully charged, the gearbox is set to low speed (screw test mode). In manual 'M' mode, the torque is set to 10 and an M4 x 25 mm screw is screwed into the pine board until the battery runs out. *Steel plate punching test method: With the device fully charged, the gearbox is adjusted to the high speed setting (drilling mode). In M mode, the torque is set to 30 and a hole is drilled in a 6 mm thick steel plate with a 6 mm rotary drill bit.
Wooden board punch test method: With the device fully charged, the gearbox is adjusted to the high speed setting (drilling mode). In M mode, the torque is set to 30 and a 40 mm deep hole is drilled in a white pine board with a 7 mm drill bit. *The whole unit conformity test report was issued by Waltek Services Test Group Ltd. in Foshan. Test reference number: WTF21F3015226G.
The entire ROHS test report of the unit was issued by EMTEK (Dongguan) Technology Co., Ltd. Test Reference Number: ED201110010C. *The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd. test reference number: ES201110017E.
The environmental reliability test report was issued by Intertek Shenzhen Ltd. Test reference number: SZHH01513728. *The battery test report was issued by Precise Testing & Certification (Guangdong) Co., Ltd. Test reference number: PTC20110204401S-GB01.
The screwdriver tip test report was issued by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Test reference number: G20201629F. The hardness varies by ±2HRC. * Two extension bar designs are available and will be shipped randomly.
The water-repellent fabric test was conducted by Center Testing International Co., Ltd. and is waterproof up to class 4-5. Test reference number: A221008511010101C. 30N-m
Torx nails T9H/T10H/T15H/T20H/T25H
Rated voltage 12V⎓
Hex nails H3/H4/H5/H6
Drilling speed without load 0-1400 rpm (electric drill speed)
Noses Slotted SL4/SL6
Noses Y Y1
Charging specifications 5V⎓3A; 9V⎓1.5A
Tri-wing noses 2.3
Charging time 120-180 minutes
Square nails S0/S1
Drill type Metal twist drill 3/4/5/6 Wood drill 4/5/6/7
U nails U2.6
Extension rod 60 mm.

Xiaomi

Xiaomi 12V Max Brushless Cordless Drill

Cordless powerful cordless drill for stable and reliable performance.

Original price was: €129.90.Current price is: €119.00.

Out of stock

add to wishlist

added to wishlist

SKU: 592180

Brand: Xiaomi

Category: Gadget

Product Description

Not suitable for use on cement
The maximum torque error is ±5 Nm due to the measuring device used. Torque test method: With the battery fully charged, the mode selection button is pressed to enter the screwdriving mode. When the screwdriver is fully charged, the screwdriver shall be pressed until the screwdriver is fully charged and the screwdriver is fully loaded, Continue a torque tester shall be used to test the torque of the locked rotor at level 30. * The no-load speed tolerance is approximately 10%. Speed test method: The fully charged device is operated for 2 minutes without load and the speed without load is checked in Continue a speed tester.
Screw test method: with the device fully charged, the gearbox is set to low speed (screw test mode). In manual 'M' mode, the torque is set to 10 and an M4 x 25 mm screw is screwed into the pine board until the battery runs out. *Steel plate punching test method: With the device fully charged, the gearbox is adjusted to the high speed setting (drilling mode). In M mode, the torque is set to 30 and a hole is drilled in a 6 mm thick steel plate with a 6 mm rotary drill bit.
Wooden board punch test method: With the device fully charged, the gearbox is adjusted to the high speed setting (drilling mode). In M mode, the torque is set to 30 and a 40 mm deep hole is drilled in a white pine board with a 7 mm drill bit. *The whole unit conformity test report was issued by Waltek Services Test Group Ltd. in Foshan. Test reference number: WTF21F3015226G.
The entire ROHS test report of the unit was issued by EMTEK (Dongguan) Technology Co., Ltd. Test Reference Number: ED201110010C. *The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd. test reference number: ES201110017E.
The environmental reliability test report was issued by Intertek Shenzhen Ltd. Test reference number: SZHH01513728. *The battery test report was issued by Precise Testing & Certification (Guangdong) Co., Ltd. Test reference number: PTC20110204401S-GB01.
The screwdriver tip test report was issued by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Test reference number: G20201629F. The hardness varies by ±2HRC. * Two extension bar designs are available and will be shipped randomly.
The water-repellent fabric test was conducted by Center Testing International Co., Ltd. and is waterproof up to class 4-5. Test reference number: A221008511010101C. 30N-m
Torx nails T9H/T10H/T15H/T20H/T25H
Rated voltage 12V⎓
Hex nails H3/H4/H5/H6
Drilling speed without load 0-1400 rpm (electric drill speed)
Noses Slotted SL4/SL6
Noses Y Y1
Charging specifications 5V⎓3A; 9V⎓1.5A
Tri-wing noses 2.3
Charging time 120-180 minutes
Square nails S0/S1
Drill type Metal twist drill 3/4/5/6 Wood drill 4/5/6/7
U nails U2.6
Extension rod 60 mm.